{width="1.3534722222222222in"
height="1.3131944444444446in"}[
]{.underline}
{width="3.2784722222222222in"
height="1.726388888888889in"}[
Installing Lights]{.underline}
Light Bar Installation:
The RGB light bars should be placed on each side of your bimini
or salon top (port and starboard) facing downward & outboard
so that the deck is illuminated by the RGB light bar with any additional
light
spilling over into the water.
{width="5.770833333333333in"
height="3.245138888888889in"}
Locate the 14AWG/ 3 conduit wire coming from the control box labeled "RGB Light Bar":
[If you are [using]{.underline} the provided DT style waterproof connector]{.mark}, use the following wiring diagram:
[14 AWG / 3 Conduit]{.underline} [DT Connector]{.underline}
WHITE Wire = (White Flood Light Power) = WHITE Wire
{width="3.0658891076115484in"
height="1.7586275153105861in"}GREEN Wire = (RGB Light Power) = RED Wire
BLACK Wire = Ground for Light (-) = Black Wire
Pirate Lights Marine Security | Installing Lights page 1 of 2
[If you are [removing]{.underline} the DT style waterproof connector]{.mark} from the light and wiring it directly, use the following wiring diagram:
[14 AWG / 3 Conduit]{.underline} [Wire directly from light]{.underline}
Black Wire = White Flood Lights
White Wire – RGB Lights
Red Wire – Ground (-)
WHITE Wire = (White Flood Light Power) = BLACK Wire
{width="1.9666666666666666in"
height="3.227777777777778in"}GREEN Wire = (RGB Light Power) = WHITE Wire
BLACK Wire = Ground for Light (-) = RED Wire
[[Cut wire From 12" Lights]{.underline}]{.smallcaps}
{width="2.5875in"
height="1.0597222222222222in"}
Strobing "Blind Light"
Ideally, the "blind light" will be mounted over the companionway as it's purpose is to stun "would be intruders" and reduce their ability to see into the boat WHILE still allowing you to see them.
{width="2.675in" height="1.1666666666666667in"}
Locate the bundle of wires labeled "Blind Light" coming from the control box and wire according to the following wiring diagram:
["Blind Light" Wire Bundle]{.underline} [BLIND LIGHT]{.underline}
YELLOW Wire = (Power) = RED Wire
BLACK Wire = Ground for Light (-) = Black Wire
{width="6.5in" height="1.8409722222222222in"}
Pirate Lights Marine Security | Installing Lights page 2 of 2